The replacement of windshield wiper blades is a relatively quick task that requires minimal tools. Follow these step by step instructions for successful instillation.

Instructions to use article templates

Create a step-by-step guide

Step 1: Gather accurate blade sizes.

• Martha's Table Sprinter Van's utilize two different sized blades. The drivers side wiper is lager than the passenger side. Confirm there are two sizes, 26" for driver side and 24" passenger.

Step 2: Prop windshield wipers up.

• Explain the actions under this step

Step 3: Disengage wiper cap.

• Pop the protective cap off so that the blade may be accessed

Step 4: Slide current blade out.

• Once the blade is exposed, grab the blade and pull towards the removed cap and discard.

Step 5: Slide in replacement blade.

• Measure the new blade along side the removed blade to confirm it is the same size. Slide the new blade into place.

Step 6: Reinstall blade cap

• Snap the cap back onto place, locking the new blade into place.